However, Xfinity Comcast is a US leading network carrier, but my experience with Xfinity for my home networking system was poor.
I needed a mesh router to maximize the speed of the Xfinity Comcast internet connection. However, I was not sure whether I could hook up Eero mesh to the Xfinity router or not.
I started to search for whether can I use Eero with Xfinity on several websites. Finally, I have got my answer.
Yes, I can use Eero with Xfinity and then, I hooked up Eero to the Xfinity router successfully.
If You are also facing an Xfinity internet issue, you can also follow the steps given in the article to improve your internet connection.
In brief, you should have an Eero mesh to connect to the ethernet port of the Xfinity. Then, you can easily connect it with Xfinity wireless by enabling its bridge mode.
Scroll down the screen to go through the following ultimate guide till the end.
Contents
Does Eero work with Xfinity?
Yes, you can use Eero with Xfinity without any ado. The compatibility of Eero has been tested with several internet service providers (ISPs) in the US.
Nobody has reported that Eero is incompatible with Xfinity or any other internet service providers to this date.
You only need to connect your Eero gateway to the Xfinity modem and you are all set up to use Eero in no time.
You will surely get a high-speed Internet Xfinity connection at your home. So, follow the steps given in this comprehensive guide and get uninterrupted internet signals to transform your home into a good workplace.
How do I connect my eero to Xfinity?
Once you have bought an Eero mesh, you can connect it to Xfinity by following a few simple steps as I did. Follow the steps that are underscored below:
- First of all, you should connect an ethernet cord to your Xfinity LAN port. Then connect the other end to your computer.
- Enter 10.0.0.1 in the browser’s address bar.
- Then, you will proceed to your Xfinity’s gateway portal.
- Enter the username and password to log into the Xfinity gateway portal.
- In case you do not remember your username and password, you should search for login credentials in the Xfinity device to log in.
- Once you log in to the account, you will view a Gateway Tab.
- Then, choose Gateway at a glance. You will view this option on the left side of the screen underneath the Gateway tab.
- Select bridge mode to turn it on.
- Press the option of confirm changes to save changes that you have done.
- Finally, connect the ethernet cord of your Xfinity to the WAN port of Eero.
Note: To get better results of pairing Eero with Xfinity Comcast, you should turn off all the devices to restart them. In this way, you will be able to get the changed configuration on all your devices efficiently.
How to fix up Xfinity Eero issues?
You should try troubleshooting tips to fix Xfinity Eero issues. The tips are given in the following paragraphs:
The ethernet cable is not loose
You should make sure that the ethernet cable is tightly fit into both ports of Eero and Xfinity.
One end of the ethernet cord should hook into the WAN port of the Eero mesh whereas the other end of the cord should hook into the LAN port of the Xfinity modem.
Unplug the modem
If the lights on Eero are turned on/off automatically, you should unplug the modem. Just wait for thirty seconds. Hopefully, this will resolve the issue.
After thirty seconds, when you plug in the modem, the light will stabilize on the Eero mesh.
Reboot the Eero gateway
You should unplug and plug in the Eero gateway. When you plug it in, your Eero gateway will prepare itself to reboot.
This will only take 2 minutes to reboot the Eero and solve your issue.
Reset the Eero
The Eero mesh comes with an internal battery. You can troubleshoot the issue by pressing the reset button for I second.
This will power cycle the mesh and your Xfinity Eero issue will be fixed.
Customer support center
In case the above-mentioned troubleshooting tips won’t work, you can make a call to the customer support center at (877) 659-2347 at the earliest.
The customer support center replies instantly. Your problem will be solved in no time.
What are the advantages of using Eero with an Xfinity modem?
Generally, Eero is preferred because it removes the obstructions that come in the way of internet signals due to ceilings and walls. It is compatible with all internet service providers. you can download and upload high-quality videos in no time.
So many features are aligned with Eero mesh making it an efficient router. Go through the following table that underscores the advantages of pairing Eero with Xfinity:
| Main Particulars to Identify the Attributes of Eero | Benefits That I Will Get After Pairing Eero with Xfinity |
| Internet speed | 350 Mbps |
| Compatible with | Xfinity Comcast and other internet service providers |
| Internet coverage | 1500 sq. feet only with one Eero. You can add more Eeros to extend the internet network coverage area at your home. |
| Burden to Xfinity due to more Eero | No burden on Xfinity |
| Number of ethernet ports | 2 LAN ports |
| Number of bands | Dual (both 2.4 and 5GHz) |
| Eero 6+ | Compatible with a 6G network in the future. Now, it is compatible with the 5G network of Xfinity as well. |
| Latency | Low latency with the compatibility for the 5G network. Highly preferred by gamers |
| Security features | Equipped with VPN Protocol. It adds an extra layer to network security |
| Set up | Its installation is complicated but you will get a guide with Eero to learn how to set it up with ISPs |
| Cost | It is expensive when it is compared to other modems. But its high features make this device worth it. |
Can Eero replace Xfinity modem?
No, Eero doesn’t replace the Xfinity modem. It only replaces the router. When you connect Eero with an ethernet cord to the Xfinity router, you need to enable the bridge mode to start the functioning of the modem. In this way, the router capabilities will be turned off and your router will convert into a modem. Eero doesn’t work without an Xfinity modem. Therefore, it doesn’t replace it in any way.
How to enable Xfinity eero bridge mode?
Ready to prepare your Xfinity modem to be connected to Eero? Right?
You should enable the bridge mode in Xfinity Comcast. Just check out the following pointers to do it:
- Go to the Xfinity Gateway portal on your computer.
- Enter your username and password to log in.
- Then, open the Gateway Tab.
- Click Enable to turn on the Bridge mode.
- Confirm enable bridge mode by pressing the option ok.
FAQs
Can any Wifi router work with Xfinity?
To check whether your WiFi router works with Xfinity Comcast or not, you should check you should ensure about it. You can find a list of Xfinity Comcast gateway-approved routers at My Device info.
Can Eero router be used as extender?
Yes, you can use an Eero router as an extender to extend the network coverage limit available on the existing Eero network. For this, you should keep a distance of about 40 to 50 feet between each Eero device.
Does Eero improve wifi speed?
Yes, the chief operation of Eero is to provide customers with a robust in-home internet connection. It is the preferred choice of gamers who want to play at a high-speed internet connection.
Can I bridge Xfinity modem?
Yes, you can bridge the Xfinity modem to connect your modem with Eero. Follow the steps that are given in the article to do it.
Which wireless router works with Xfinity Comcast?
Amazon Eero Mesh Wif-Router, TP-Link AX 3000 Wifi 6 Router, Netgear cax80, Arris s33, and Xfinity modem router are the most popular routers that work with Xfinity Comcast.
Is Eero compatible with Xfinity gateway?
Yes, Eero is compatible with the Xfinity gateway. Even Eero’s upgraded version Eero 6 plus which is compatible with the low latency 6G network is also compatible with the low latency 5G network of Comcast gateway.
Do other routers work with Xfinity?
Yes, you can use your router instead of Xfinity without any issues. You only need to start the internet connection. It should be activated by going to the Xfinity website.
The Bottom Line
I hope that you have found this blog informative to solve your query regarding the use of Eero with Xfinity Comcast.
The above-mentioned steps to set up the Eero with Xfinity are tested. You can try them without any issues.
Besides this, you have got the solutions to your issues with Eero and Xfinity in the frequently asked questions as well.
Good luck and enjoy an uninterrupted Xfinity internet with Eero.
If the problem persists, you should write to us. We will find a solution together.